UPRACK foot kitsUPRACK platformsUPRACKS accessories« back |
Your secure: |
UPRACKS ringbolt M8, Piece
Due to the standardized size of the channels, the eyebolts can be fastened in all channels with the supplied rectangular insert nut.
UPRACK RECTANGULAR NUT M8 FOR C-CHANNEL 20mm, incl. screw
Mit Hilfe des einfachen "Slide-In-All" Systems dient diese spezielle Mutter (Steigung M8) als Ankerpunkt für die unterschiedlichsten Anbauteile. Sie kann in jede Nut des Dachgepäckträgers eingelegt...
UPRACK RECTANGULAR NUT M8 FOR C-CHANNEL 40mm, incl. screw
With the help of the simple "Slide-In-All" system, this special nut (M8) serves as an anchor point for a wide variety of attachments. It can be inserted into any channel of the roof rack and has th...
The wheel holder can be quickly attached and removed as required. Its C-shaped
bracket simply encloses a cross member of the platform. After the wheel is positioned, the synthetic resin cone centers itself in the rim hole and the wheel is secured by the wing nut. The great th...
This canister holder allows you to position a single canister on the
Upracks luggage rack. It can be mounted lengthways as well as crossways to achieve optimal weight distribution. The individual canister holders can be screwed together using the connecting pieces s...
The set consists of two holders that can be mounted in any channel of the Upracks
platform. Strong rubbers offer an optimal attachment for axes, shovels, etc. with a diameter of 15-35mm.
The set consists of two holders that can be mounted in any channel of the Upracks
platform. Strong rubbers offer an optimal attachment for axes, shovels, etc. with a diameter of 25-50mm.
The set consists of two holders that can be mounted in any channel of the Upracks
platform. Strong rubbers offer an optimal attachment for axes, shovels, etc. with a diameter of 44-73mm.
The set consists of two holders that can be mounted in any channel of the Upracks
platform. Strong rubbers offer an optimal attachment for axes, shovels, etc. with a diameter of 65-90mm.
The robust brackets allows you to fit a Hi-lift to the Upracks platform. The set
consists of 3 holding devices on which the Hi-Lift is first placed and then attached. In order to be able to better transfer the weight of the Hi-Lift (over 12 kg) and resulting forces to the platf...
L = 1200 mm
The wind fairing made of ABS was developed to eliminate noise and reduce fuel consumption and can be screwed onto the Upracks platform in just a few minutes. It is possible to point the sheet eithe...
UPRACK ABS wind deflector 92cm
Senkt Geräusche und spart Sprit
UPRACK ABS wind deflector 112cm
Senkt Geräusche und spart Sprit
The wind fairing made of ABS was developed to eliminate noise and reduce
fuel consumption and can be screwed onto the Upracks platform in just a few minutes. It is possible to point the sheet either up or down. 2 wind fairings can also be installed to create air diffusi...
The headlight brackets can be attached downwards and upwards to the outer frame
of the Upracks platform. It can also be used as universal or aerial holder. They 63-A010 is supplied in pair with the appropriate fitting accessories.
The long universal brackets come in pairs and are screwed onto the outer
frame of the platform several times. Their solid construction allows them to be loaded with up to 15 kg (the pair).
Slidable awning holder for the most common awnings (ARB Touring, RhinoRack
Sunseeker / Batwing, ...). Only fits in conjunction with Upracks platforms.
UPRACKS Bergeboard (1 Stk.) Kunststoff, orange, 142 x 29 x 5 cm
and a good alternative to heavy and bulky tracks made of metal.
The sand plate holder is screwed several times to the outer frame and can
accommodate different metal sheets. The synthetic resin cone fits into holes with a diameter of 30 mm - 120 mm. Keys, nuts and mounting kit are included in the package.
The square nuts can easily be "fished" out of the channels of the
Upracks platfrom by using the Micro-magnet.
RECOMMENDED PRODUCTS ON THESE ITEMS